Skip to main content
Architecture & EngineeringArchitecture CAD31 lines

Verify a Window Configuration in Oknosoft WindowBuilder

Use the verified Oknosoft dealer-order product with an approved catalog and compare drawing, dimensions and estimate against a known fixture.

Quick Summary9 lines
Confirm that the installation is Oknosoft's dealer-order service or a deployment of its WindowBuilder project. The public project describes a graphical builder for window and glazing products. Identify the deployed version, authorized workspace and responsible catalog administrator. Use the matching vendor material or workspace guidance for controls and output options, since the catalog and integrations can differ by deployment.

## Key Points

- [Oknosoft WindowBuilder repository](https://github.com/oknosoft/windowbuilder)
- [Oknosoft dealer-order product](https://www.oknosoft.ru/zd/)
- [Oknosoft product wiki](https://github.com/oknosoft/windowbuilder/wiki)
skilldb get architecture-cad-skills/oknosoft-windowbuilderFull skill: 31 lines
Paste into your CLAUDE.md or agent config

Verify a Window Configuration in Oknosoft WindowBuilder

Establish the product and catalog in use

Confirm that the installation is Oknosoft's dealer-order service or a deployment of its WindowBuilder project. The public project describes a graphical builder for window and glazing products. Identify the deployed version, authorized workspace and responsible catalog administrator. Use the matching vendor material or workspace guidance for controls and output options, since the catalog and integrations can differ by deployment.

Record the catalog revision, available material systems, units, product template and approved price source. A browser interface can reflect a local or synchronized catalog; verify the actual data version before comparing estimates. Start with a synthetic or approved fixture whose dimensions, opening directions, profiles, glazing, hardware and expected quantities are known. Avoid real addresses and customer details in the fixture.

Recreate one product before estimating

Enter the required geometry and select the approved product system. Compare overall dimensions and subdivision against the fixture before choosing finishes and hardware. Record whether the drawing is shown from inside or outside, since that affects the interpretation of opening directions. Use the supported validation features for the installation and review any unavailable or incompatible item. Ask the catalog owner to resolve a missing material rather than substituting a similar-looking profile.

Compare the drawing and estimate separately. The drawing should match the intended proportions, dimensions and opening orientation. The estimate should show the expected product selection, quantities, material units and applicable price basis. Reconcile any rounding differences and identify labor, delivery or tax items whose rules are external to the configurator. Save a test quotation only through the approved fixture workflow.

Verify revision and failure behavior

Repeat the fixture with one deliberate change, such as a changed opening direction or missing catalog item. Verify that the output changes in the expected place, and that an incomplete configuration cannot be confused with an approved production order. If exporting a drawing or estimate, open the artifact independently and check dimensions, revision label and page readability.

Record application version, catalog and price revision, assumptions, input dimensions and the separately reviewed drawing and estimate evidence. Leave production ordering and fabrication approval to the qualified owner. An unavailable deployment or unknown catalog should remain a named review gap.

References

Install this skill directly: skilldb add architecture-cad-skills

Get CLI access →